CA-LE-12

GIS Load Break switch

630A SF6 full insulated switchgear

GIS Load Break switch

Description

General

  • CA-L-12H  GIS Load Break switch conforms to the relative requirement of “GB3804-2004 High-voltage alternating-current switches for rated voltage above 3.6 kV and less than 40.5 kV” and “GB16926-1997 High-voltage alternating current switch-fuse combinations”.

  • Main Loop: 630A-20kA(4s)、25kA(3s)

  • Service Life:5000 times

  • Ground Loop: 20kA(2s)

  • Mechanical Life: 2000 times.

Environmental conditions and attention

  • The altitude should not exceed 2000m and seismic intensity should not exceed 8 degrees.

    Ambient air temperature should not be higher than 50 Celsius degrees and should not be lower than forty-five below zero. The daily average differences between day and night temperatures should not be higher than 95% and monthly average should not be high than 90%.

  • The operating mechanism should not be installed in the places as below:

    The places with frequent violent vibration

    The places with great vapor、gas、chemical corrosive deposition、salt mist and dust.

    The place where it is easily inflammable and explosive.

Specifications

CA-L-12H GIS Load Break switch

Main technical specification

ItemContentUnitSpecification
1Rated frequencyHz50-60
2Rated currentA630
3Rated short-time withstand currentKA20/25
4Rated peak withstand currentKA50
5Rated duration of short-circuit s4
6Ratedc current of short circult KA50
7Service Life(theoretically)Frequency5000

Overall dimension

SF6 RMU LBS